How Do You Repair Chipped Porcelain Tub

Download Article

Download Article

Fixing a chipped bathtub is a do-it-yourself project that volition save y'all from hiring an expensive professional. Whether your tub merely has a few small-scale fries, or it is desperately damaged and needs to be refinished, these are both projects that you will find kits for at your local home improvement store. With a little elbow greasy, your tub volition look like new in just a affair of days!

1. ane

   Buy a 2-component epoxy kit for fleck repair. Look in the adhesive or bathroom repair department of a domicile hardware store. Purchase a kit that comes with both the catalyst and hardener that yous will mix together to create the epoxy.^[i]

   • Virtually epoxy scrap repair kits come in shades of white to match the most common color of bathtubs. Try to choose a kit that will closely lucifer the shade of your bathtub, or 2 kits that y'all can mix together to create the right color.
   • Epoxy repair kits work to fix chips in all kinds of bathtubs including ceramic, porcelain, acrylic, fiberglass, and enamel tubs.

2. 2

   Scrub the damaged area with a sponge and soap or tub cleaner, and so dry it. Utilise warm water and dish detergent or a household tile and tub cleaner to clean the chipped area. Thoroughly dry out the area with a make clean rage afterwards you lot cease cleaning information technology.^[2]

   • Y'all can likewise use acetone or rubbing alcohol to make clean the surface area. Whatever product that removes grease and soap scum will work to make clean the chip.

   Advertisement

3. 3

   Follow the directions on your epoxy kit to mix the 2 components together. Some epoxy kits come with a mixing tray and stirring stick for you to use. Mix the epoxy in a disposable tray with a toothpick or matchstick if your kit didn't come up with the mixing supplies.^[three]

   • It's a skilful idea to set the tray on a piece of cardboard or some scraps of paper to grab any spills.

4. 4

   Apply the epoxy to the scrap with a pocket-sized spatula, paint brush, or lesser of a matchstick. Scoop up a small-scale corporeality of the epoxy with your called utensil. Spread it carefully in a thin layer over the scrap by working in 1 direction and polish out any spots where it pools.^[iv]

   • Brand sure that anything you use to apply the epoxy is disposable. It will exist hard to go the epoxy off of anything it touches.
   • Information technology's easiest to kickoff with a small amount of epoxy and add more layers than it is to put likewise much on and remove it.

5. 5

   Permit the epoxy dry, then sand downwardly the surface with 400-600 grit sandpaper. Follow the directions on your epoxy kit to let it fully dry out. Gently sand the surface with 400- or 600-grit sandpaper until information technology feels shine like the rest of the tub.^[v]

   • Some epoxy will set up in 2-3 hours, at which point you lot can sand. Other kits may propose you to wait up to 24 hours earlier sanding.
   • You lot can add another layer of epoxy after sanding if y'all can still feel the chip. And then repeat the process.
   • Go on in mind that while this is will help hibernate small chips, you may still be able to notice the patch. This volition be specially obvious if you try to fill a number of chips with the epoxy.^[half-dozen]

   Advertisement

1. 1

   Buy a bathtub refinishing kit at a home improvement heart. Save yourself fourth dimension past ownership a whole kit that has everything yous demand to refinish your tub. Most kits come with tub cleaner, sandpaper, primer, refinishing pigment, a paint tray, a brush, and a roller.^[vii]

   • Check that the kit comes with a durable resin coating for your tub. Some cheaper kits come up with an epoxy coating, which chips and discolors faster.
   • Refinishing kits can cost from about $xxx-$100 USD.
   • Tub refinishing kits work to refinish all kinds of bathtubs including ceramic, porcelain, acrylic, fiberglass, and enamel tubs. The kits will provide a new porcelain-similar cease to these kinds of tubs.

2. 2

   Ventilate the bath, cover the floors, and put on protective gear. Open up all the windows and put a fan in the bathroom to ventilate it. Cover the floors with heavy-duty plastic sheets to proceed them safe during the refinishing process. Put on a face mask and goggles.^[viii]

   • You can as well drape plastic sheets over fixtures like the toilet and sink to protect them.

3. three

   Make clean the bathtub with the cleaner from the kit. Read the directions on the cleaner to apply information technology to the tub and utilize a sponge to scrub the tub clean. Rinse the tub out, then become over it with the sponge and cleaner 2 more times to remove any soap scum and stains before y'all refinish it.^[9]

   • If your kit did not come with cleaner, then purchase an industrial force bathtub cleaner to employ.
   • Let the tub completely air dry out, or speed upwardly the procedure with towels and a hair dryer.

4. iv

   Sand the whole tub with the sandpaper in your kit to remove the old finish. Kickoff with the everyman-dust sandpaper from your refinishing kit and sand the whole surface of the tub in circular motions past hand, or with an electrical sander. Work your manner up to the highest-grit sandpaper in your kit until the tub is completely smooth.^[10]

   • Your refinishing kit should come with sandpaper to use. If your kit didn't come with sandpaper, then start with 400-dust sandpaper and work your way upwards to 2000-dust. Increase the grit of the sandpaper in increments of 200 until you achieve grand-dust sandpaper, then go up in increments of 500 until you end using 2000-grit sandpaper.

5. 5

   Repair whatever chips or cracks in the tub with a two-component epoxy bit repair kit. Follow the instructions to mix the two parts of the epoxy in a small tray. Use a small castor, spatula, or the bottom end of a matchstick to apply thin layers of epoxy to any fries. Await 2-3 hours until the epoxy dries and sand the patches downward with 2000-dust sandpaper to match the stop of the rest of the tub.^[11]

   • This will ensure that the tub has no chips or cracks and seal the surface before you lot apply the new cease.
   • Get a 2-component epoxy chip repair kit from the bath remodeling or agglutinative section of a home improvement store if your kit did not come with it.

6. six

   Put painter's tape on the walls and around any plumbing fixtures. Tape forth the edges of the tub where they touch the walls and around the faucet and other fixtures. Even if y'all have a steady hand, it's piece of cake for paint to go astray!^[12]

   • Painter'due south record is the blue masking tape that yous tin can detect at hardware and paint stores.

7. 7

   Apply ane coat of primer with a castor and roller. Employ a roller to curl on the primer onto the large, flat sections of the tub like the floor and sides, then use a brush to become into the corners and curved parts. Let it dry for at least 2-3 hours earlier you lot start to paint on the new finish.^[13]

   • Priming the surface is an important office of ensuring that the new finish adheres correctly so that you end up with the right texture. Brand certain that the primer is completely dry to the bear on earlier you paint over it.

8. eight

   Paint on 2-3 coats of the new terminate with a brush and roller. Always pigment in 1 direction when you use the new coat to your tub. Roll on the new finish to the floors and sides in even back-and-forth rolls until the flat area is completely covered. Make full in the corners and curves of the tub with even back-and-forth brush strokes. Permit each coat dry out for at least 30 minutes earlier you put the adjacent coat on.^[fourteen]

   • Some kits may come up with a spray-on finish. If you lot employ a sprayer instead of a brush or roller, try to spray evenly and in 1 direction. Make sure your walls and fixtures are well-protected by tape where in that location is a take a chance of paint spray hitting them.

9. 9

   Allow your bathtub sit down for two-3 days before you lot use it. The new cease needs to set completely before y'all run water over it. Consult your kit's directions for the exact drying time for your specific finish.^[15]

   • If you don't permit the finish dry out long plenty, y'all could end up with streaks and bubbles in the new coating and yous volition need to start the process over once more.
   • Your new DIY finish volition final for years, but keep in mind that professional finishes will terminal even longer.
   • The chemicals used in this process can be unsafe, so information technology may be a good idea to stay somewhere else for a few days while the tub cures.^[sixteen]

   Advertisement

Add New Question

• Question

  How do y'all set a fleck in a porcelain tub?

  

  Fine art Fricke
  Home Renovation & Repair Specialist

  Fine art Fricke is a domicile renovation and repair specialist and the possessor of Fine art Tile & Renovation based in Austin, Texas. With over 10 years of experience, he specializes in bath and kitchen renovations. Fine art focuses on a unmarried contractor approach to customized renovation work, and performs projects such equally installing custom tile showers, fixing tiled shower leaks, replacing cracked tiles, and installing floor and wall tile.

  

  Dwelling Renovation & Repair Specialist

  Expert Answer

  

  Back up wikiHow by unlocking this practiced answer.

  If yous just have a small, isolated chip, you can get enamel set from a habitation improvement shop. Just dab a little on, then let it dry. However, keep in listen that you lot'll probably yet exist able to encounter the patch, especially if you're trying to comprehend a number of chips.

Ask a Question

200 characters left

Include your email accost to get a bulletin when this question is answered.

Submit

Advert

Things You'll Demand

• 2-component epoxy fleck repair kit
• Sponge
• Soap or household tub and tile cleaner
• Disposable tray and mixing stick
• Small-scale spatula, castor, or matchstick
• 400-600 grit sandpaper

• Bathtub refinishing kit (tub cleaner, sandpaper, primer, refinishing pigment, a paint tray, a castor, and a roller)
• 2-component epoxy flake repair kit
• Small spatula, brush, or matchstick
• Face mask
• Goggles
• Fan
• Heavy-duty plastic sheets
• Painter's tape

• If yous don't want to refinish your bathtub on your ain, y'all tin can rent a professional person who's specialized in refinishing tubs, instead.^[17]

Advertisement

Well-nigh This Article

Article Summary X

If you have a small fleck in your bathtub, you lot tin gear up information technology with an epoxy kit. Before you start, scrub the damaged area of your tub make clean with a sponge and some soap and water. Follow the directions on your epoxy kit for mixing the 2 components together. Once they're mixed, use a pocket-size spatula or a paintbrush to spread a thin layer of the epoxy over the chip. Wait for it to fully dry out, which should have at least ii-3 hours, then utilise sandpaper to buff out the dried epoxy until its smooth. If your bathtub is badly damaged, y'all tin use a bathtub refinishing kit to restore the terminate. Y'all'll need to sand the whole tub to remove the one-time end, repair all the cracks with epoxy, then paint on new primer and terminate. To larn how to prevent paint from getting on you tile, read on!

Did this summary assist yous?

Thank you to all authors for creating a page that has been read 78,771 times.

Did this commodity help you?

Source: https://www.wikihow.com/Fix-a-Chipped-Bathtub

Posted by: brockpoliose.blogspot.com

Share this post